This page:

Alfa 156, 147, GT Rear Wheel Bearing Change

	Jack car up, when jacking the car up make sure it is secure and safe using an axle stand and then remove road wheel.
	Remove brake calliper and brake pads and put brake pads somewhere where they will not get contaminated.
	Remove bolt securing disk and then remove disk, again keep it clean and don't damage it.
	Undo wheel bearing securing nut and remove all of wheel bearing, the inner race sometimes stays on the stub axle and needs to be removed.
	Wheel bearing removed, now re fit new wheel bearing (156 / 147 / GT) and do up to the correct torque (30.4-33.6 daNm) then reassemble in the reverse order, making sure you clean the mounting face of the disk.
If you are an existing online parts customer of ours, you can get Further Technical DataIf you are unsure about your login details, have a look at the bottom of previous emails from us. If you no longer have these emails, click through this link and then on the "Forgotten Password" link, using the email that you used for the last purchase (usually the email address you use for PayPal). If you still have problems, don't set yourself up as a new user as this new user won't have the purchase history to allow access to the technical data. Just send us an email instead.