|
Alfa Romeo 4C Parts > Wishbones front |
Terms & Conditions Delivery
|
|
|
|
 | For Export outside the United Kingdom, VAT will be deducted in the Basket once you have selected your delivery location.
|
|
|
 | All parts are genuine or direct from the original equipment manufacturer. These are the exact same parts we use in the workshop, so are well proven. There are loads of "How To" articles on the site, but if you buy the parts from us and you get stuck, we fit them day in and day out so will be able to give you some pointers if you get in contact via your email address or phone number that you ordered with. |
|
|
| |
|
| |
|
| Engine Variants: |
1750 TBi
|
| Brand: |
Genuine Alfa Romeo |
| Description: |
SUSPENSION arm.
Front - LEFT side
UPPER wishbone. |
|
| Part No: |
50531753 |
| Availability: |
Out Of Stock. Add 1 To 5 Weeks To Delivery Time
Request Email Alert when Available
|
| Our Price: | £1,152.12 inc VAT | | Excluding VAT: | 1+ £960.10
5+ £832.74
10+ £730.85 |
|
|
| |
|
| Engine Variants: |
1750 TBi
|
| Brand: |
Genuine Alfa Romeo |
| Description: |
SUSPENSION arm.
Front - RIGHT side
UPPER wishbone. |
|
| Part No: |
50531752 |
| Availability: |
3 In Stock |
| Our Price: | £1,180.92 inc VAT | | Excluding VAT: | 1+ £984.10
5+ £901.42
10+ £835.27 |
|
|
| |
|
| Engine Variants: |
1750 TBi
|
| Brand: |
Genuine Alfa Romeo |
| Description: |
SUSPENSION arm.
Front - LEFT side
LOWER wishbone. |
|
| Part No: |
50553853 |
| Availability: |
2 In Stock |
| Our Price: | £768.00 inc VAT | | Excluding VAT: | 1+ £640.00
5+ £585.31
10+ £541.56 |
|
|
| |
|
| Engine Variants: |
1750 TBi
|
| Brand: |
Genuine Alfa Romeo |
| Description: |
SUSPENSION arm.
Front - RIGHT side
LOWER wishbone. |
|
| Part No: |
50553854 |
| Availability: |
2 In Stock |
| Our Price: | £720.00 inc VAT | | Excluding VAT: | 1+ £600.00
5+ £554.24
10+ £517.62 |
|
|
| |
|
| Engine Variants: |
1750 TBi
|
| Brand: |
AlfaWorks |
| Description: |
SUSPENSION arm.
FRONT - RIGHT LOWER wishbone.
The silent block bushes in the body side of the wishbone are replaced with cross axis joints. They consist of a ball with cylindrical taper on both sides and a continuous bar through the middle. Although they are similar to the ball joint in terms of function and structure, their anchorage corresponds to that of rubber bearings.
In contrast to rubber bearings, cross-axis joints are able to transfer extremely high dynamic forces and have no aligning torque. Cross-axis joints are preferably used if a stiff control arm connection is desired and they add a far greater degree of control to changes in dynamic camber.
Performance Category: Race, Track Day. |
|
| Part No: |
SP50531750 |
| Availability: |
2 In Stock |
| Our Price: | £880.80 inc VAT | | Excluding VAT: | 1+ £734.00
5+ £673.26
10+ £624.67 |
|
|
| |
|
| Engine Variants: |
1750 TBi
|
| Brand: |
AlfaWorks |
| Description: |
SUSPENSION arm.
FRONT - RIGHT UPPER wishbone
The silent block bushes in the body side of the wishbone are replaced with cross axis joints. They consist of a ball with cylindrical taper on both sides and a continuous bar through the middle. Although they are similar to the ball joint in terms of function and structure, their anchorage corresponds to that of rubber bearings.
In contrast to rubber bearings, cross-axis joints are able to transfer extremely high dynamic forces and have no aligning torque. Cross-axis joints are preferably used if a stiff control arm connection is desired and they add a far greater degree of control to changes in dynamic camber.
Performance Category: Race, Track Day. |
|
| Part No: |
SP50531752 |
| Availability: |
2 In Stock |
| Our Price: | £1,341.72 inc VAT | | Excluding VAT: | 1+ £1118.10
5+ £1,020.44
10+ £942.31 |
|
|
| |
|
| Engine Variants: |
1750 TBi
|
| Brand: |
AlfaWorks |
| Description: |
SUSPENSION arm.
FRONT - LEFT UPPER wishbone
The silent block bushes in the body side of the wishbone are replaced with cross axis joints. They consist of a ball with cylindrical taper on both sides and a continuous bar through the middle. Although they are similar to the ball joint in terms of function and structure, their anchorage corresponds to that of rubber bearings.
In contrast to rubber bearings, cross-axis joints are able to transfer extremely high dynamic forces and have no aligning torque. Cross-axis joints are preferably used if a stiff control arm connection is desired and they add a far greater degree of control to changes in dynamic camber.
Performance Category: Race, Track Day. |
|
|
|
| |
|
| Engine Variants: |
1750 TBi
|
| Brand: |
Genuine Alfa Romeo |
| Description: |
PLATE.
FRONT wishbone shim
This is used for minor adjustments of the geometry on the 4C.
Performance Category: Race, Track Day and Fast Road (0.87mm). |
|
| Part No: |
50532618 |
| Availability: |
35 In Stock |
| Our Price: | £12.00 inc VAT | | Excluding VAT: | 1+ £10.00
5+ £8.80
10+ £7.84 |
|
|
| |
|
| Engine Variants: |
1750 TBi
|
| Brand: |
AlfaWorks |
| Description: |
RACE spacers.
Set of x8 modified wishbone spacers gives improved steering/handling for extreme racing.
These increase significantly the range of camber that the car can have and also increase the castor of the car, together with our toe settings these transform the handling of the 4C
(nut 50530840 supplied separately).
*These will increase wear on the inside edge of the tyre
Performance Category: Race. |
| Related Articles: | How to set up the front suspension on the Alfa 4C | Reviews of our Alfa 4C Geometry set up |
|
|
|
| |
|
|
|
|
| |
|
|
| Part No: |
50510853 |
| Availability: |
10 In Stock |
| Our Price: | £4.20 inc VAT | | Excluding VAT: | 1+ £3.50
5+ £3.10
10+ £2.78 |
|
|
| |
|
|
| Part No: |
811900443 |
| Availability: |
10 In Stock |
| Our Price: | £3.00 inc VAT | | Excluding VAT: | 1+ £2.50
5+ £2.15
10+ £1.87 |
|
|
| |
|
|
| Part No: |
BALLJ_S |
| Availability: |
16 In Stock |
| Our Price: | £84.00 inc VAT | | Excluding VAT: | 1+ £70.00
5+ £61.67
10+ £55.00 |
|
| |
|
|
| Part No: |
BALLJ_S |
| Availability: |
10 In Stock |
| Our Price: | £91.20 inc VAT | | Excluding VAT: | 1+ £76.00
5+ £66.86
10+ £59.55 |
|
|
| |
|
|
| Part No: |
BALLJ_L |
| Availability: |
7 In Stock |
| Our Price: | £93.00 inc VAT | | Excluding VAT: | 1+ £77.50
5+ £67.79
10+ £60.02 |
|
|
| |
|
|
| Part No: |
50526402 |
| Availability: |
Out Of Stock. Add 1 To 5 Weeks To Delivery Time
Request Email Alert when Available
|
| Our Price: | £5.39 inc VAT | | Excluding VAT: | 1+ £4.49
5+ £4.49
10+ £4.49 |
|
|
| |
|
|
| Part No: |
50530840 |
| Availability: |
18 In Stock |
| Our Price: | £1.32 inc VAT | | Excluding VAT: | 1+ £1.10
5+ £0.87
10+ £0.68 |
|
|
| |
|
| Engine Variants: |
1750 TBi
|
| Brand: |
Genuine Alfa Romeo |
| Description: |
SUSPENSION ARM.
Front - Right upper RECONDITIONED wishbone
The silent block bushes in the body side of the wishbone are replaced with cross axis joints. They consist of a ball with cylindrical taper on both sides and a continuous bar through the middle. Although they are similar to the ball joint in terms of function and structure, their anchorage corresponds to that of rubber bearings.
In contrast to rubber bearings, cross-axis joints are able to transfer extremely high dynamic forces and have no aligning torque. Cross-axis joints are preferably used if a stiff control arm connection is desired and they add a far greater degree of control to changes in dynamic camber.
Performance Category: Race, Track Day. |
| Related Articles: | 4C front lower wishbone ball joint replacement | Reviews of our Alfa 4C Geometry set up |
|
| Part No: |
50531752REC |
| Availability: |
1 In Stock |
| Our Price: | £666.00 inc VAT | | Excluding VAT: | 1+ £555.00
5+ £491.25
10+ £440.25 |
|
|
| |
|
| Engine Variants: |
1750 TBi
|
| Brand: |
AlfaWorks |
| Description: |
SUSPENSION ARM.
Front - Left upper RECONDITIONED wishbone
The silent block bushes in the body side of the wishbone are replaced with cross axis joints. They consist of a ball with cylindrical taper on both sides and a continuous bar through the middle. Although they are similar to the ball joint in terms of function and structure, their anchorage corresponds to that of rubber bearings.
In contrast to rubber bearings, cross-axis joints are able to transfer extremely high dynamic forces and have no aligning torque. Cross-axis joints are preferably used if a stiff control arm connection is desired and they add a far greater degree of control to changes in dynamic camber.
Performance Category: Race, Track Day. |
| Related Articles: | 4C front lower wishbone ball joint replacement | Reviews of our Alfa 4C Geometry set up |
|
| Part No: |
50531753REC |
| Availability: |
1 In Stock |
| Our Price: | £660.00 inc VAT | | Excluding VAT: | 1+ £550.00
5+ £487.50
10+ £437.50 |
|
|
